TV Box Forum
unsuccessful firmware update !!! - Printable Version

+- TV Box Forum (http://www.tvboxforum.com)
+-- Forum: YUNDOO (http://www.tvboxforum.com/forumdisplay.php?fid=27)
+--- Forum: YUNDOO TV BOX (http://www.tvboxforum.com/forumdisplay.php?fid=34)
+---- Forum: YUNDOO Y8 (RK3399) (http://www.tvboxforum.com/forumdisplay.php?fid=42)
+---- Thread: unsuccessful firmware update !!! (/showthread.php?tid=7440)



unsuccessful firmware update !!! - paniker378 - 07-12-2018

Добрый день. У меня проблема. После неудачной прошивки yundoo y8. Windows, еще не определено (не видит). Я не знаю что делать!!! есть ли кто-нибудь, у кого нет задачи ориентирования телевизионного бокса? Помогите с Евгением Huh Huh Huh


RE: unsuccessful firmware update !!! - gatos814 - 07-12-2018

Don't worry!
Use one stock firmware you know it's working and look here for the identical instructions!
Needs a little tricky work from you but at the end i'm sure you'll make it workable again!
Good luck!

http://ugoos.net/blog/reflashing-in-maskrom-mode-if-device-bricked


RE: unsuccessful firmware update !!! - paniker378 - 07-12-2018

Thank you so much .but the memory here is different


RE: unsuccessful firmware update !!! - gatos814 - 07-12-2018

Take a picture of the NAND memory and look for help on internet...
Maybe you'll find something....
But from the time you are in position ''zero'' and have nothing to loose try to do as described on ''CONNECTING TO PC in MASKROM MODE'' section!
Try and other pins and i'm sure at the end you'll be the winner!
If you find the right pins you will get in MASKROM MODE on Rockchip devices!
Good luck!